A MORE PERFECTED 38-FOOTER
Totally 116 hulls of the Hallberg-Rassy 382 were built from 1984 until 1992. The difference between the HR 38 and the HR 382 is definitely more than one might think at first sight. The HR 382 is a completely new, more modern design. The hull lines are all-new, more contemporary, incorporating eight years more experience. The hull of the 382 is longer, wider, has a sharper entry, a flatter aft section, deeper, shorter and more efficient keel, as well as more efficient rudder design.
IMPROVED PERFORMANCE WITH GREATER SAIL AREA AND MORE EFFICIENT HULL
The sail area is bigger on the 382, that has a double spreader rig. The HR 38 has a single spreader rig. The hull of the 382 is insulated with Divinycell foam core as on the current range of Hallberg-Rassys. The HR 38 has stringers and no insulation in the hull.
The well working principal of the interior layout is the same, but the 382 has a more seagoing F-shaped galley and has even finer joinery works with its louvered doors, elegantly rounded edge of the saloon table and more lavishly fitted out upholstery.
All in all, the 382 is a more perfected 38.
|Designers||Christoph Rassy/Olle Enderlein|
|Hull length||11.62 m / 38'1"|
|Waterline at rest||9.50 m / 31' 2"|
|Beam||3.64 m / 11'11"|
|Draught, empty standard boat||1.84 m / 6' 1"|
|Displacement, empty standard boat||9 tons / 19 840 lbs|
|Keel weight||3.9 t / 8 600 lbs|
|Keel type||lead encapsulated in deep GRP bilge|
|Sail area with jib||70.5 m² / 759 sq. ft|
|Engine||Volvo Penta MD30, later MD22P|
|Power at crank shaft, MD 30||46 kW / 62 HP|
|Diesel tank||335 litres / 89 US gallon|
|Fresh water tanks||580 litres / 153 US gallon|
|Mast over water, without antennas/Windex||16.5 m / 54' 2"|
|Transport height with windscreen||3.96 m / 13'|
|Transport height without windscreen||3.57 m / 11' 9"|