Security alert for Hallberg-Rassy 40 headstay fittings

Owners of Hallberg-Rassy 40 with deliveries 2004 - 2008, production numbers 28-101, are requested to contact the mast supplier Seldén Mast under the following link: http://www.seldenmast.com/frameset.cfm?id=6826

There are no reports about any mast coming down, but it is still highly recommended to contact Seldén as per above.

It is important to point out that only the above boats, who have a 10 mm forestay, are affected. Although the same forestay fitting (Seldén part No 517-914) is used also on other Hallberg-Rassy models, for example the 37 with 8 mm forestay, and to cutter stays, that is not affected by this safety alert.

Further info in this PDF (click here)

Archive